Smart Solutions Cups

 

ARCS SPRAY PAINT APPLICATION SYSTEM, FAST AND EASY!

HANDLING EXPENSIVE PAINTS IS PART OF YOUR DAILY ROUTINE AND HAS BECOME SECOND NATURE. TO TREAT PAINTS WITH THE UTMOST CARE, HIGH-QUALITY SPRAY PAINT PREPARATION AND PAINT APPLICATION PRODUCTS ARE CRUCIAL.

To achieve the best possible spray paint results, craftsmen always lookout for the most efficient ways to handle paint. We found that in our industry, the paint prep for paint application was in need of an update. A lot of paint systems consist of various different (and expensive) parts. An inconvenient and inefficient process that needed to see improvement. Together with professionals, we developed a fast and easy paint application system. Ready to roll in just 2 simple steps!

ARE YOU READY TO ROCK AND ROLL?

We will help you out with a quick user guide (it actually speaks for itself!).

HOLD ON, JUST ONE SECOND!

Before you start, always make sure you are well prepared. You probably don’t need to be reminded, but before starting any job, please take care of your personal safety by choosing the right Personal Protective Equipment (PPE). Keep your PPE clean and do not enter the spray area if you do not need to, in order to maintain the best results.

PREPARE YOUR EQUIPMENT

When you are a regular Paint Application System user, you can skip this. But first, make sure your adapter is well mounted on your spray gun. Easy does it, just screw it on and secure it by using a Bahco or wrench #22 to prevent leaking. Never use the system when the adapter is only secured by hand. This could cause a mess! Adapters are available for different types of spray guns. Unsure which adapter to choose? Contact us and we will help you out.

PICK A SIZE

The ARCS Paint Application System comes in 4 different sizes.

PICK A FILTER

The ARCS Paint Application System can be used with all types of paints due to the four different filters. Determine your type of paint and pick the correct filter:

Paint Type Advised filter in microns
Clear Coats White – 90 microns
Waterborne coats Blue – 130 microns
Conventional base coats Green – 190 microns
Primers Red – 280 microns

Go to Top